Minicopter Canada News
Actronic 120
The actronic 120 is based on the wish of 3D-pilots for a powerful and
good value controller for upto 12 Lipo-cells (12s). Based on the reliable
two-sheet-technology of the actronic 80-32 here a completely new power-board
with considerable larger FETs is used. The actronic 120 software is designed
for fast reactions on typical 3D-power-change, so rotorspeed will be kept
constant for a wide range.
Technical datas:
Weight: 180 grams (6 oz.)
Dimensions: 85x50x20 mm
Ord.-No. 1622 actronic 120
Actronic 80 - 32
New brushless controller for all actros and nearly all other brushless motors. Twin board layout with separated control and power board and large cooling block. Thru these items the actronic 80-32 is designed for a continuous current of upto 80 amps with 10 Lipo-cells (32 cells NiCd/NiMh). Absolutely rigid on half throttle. The governor items can be modified thru jumpers in maximum motor speed (2 speeds) and additionally you can choose between using the Controlpanel V3 or not (governor activation alternatively with a jumper). The actronic 80-32 is available in two versions. The "time"-Version (Ord.-No. 1619) is thought for use with long flight times as well as for photo helicopters. The "power"-Version (Ord.-No. 1621) is especially designed for use in aerobatic or 3D-helicopters. A change from the one to the other version is possible each time adding the controlpanel V3.
Ord.-No. 1619 actronic 80-32 "time"
Ord.-No. 1621 actronic 80-32 "power"
"Explorer" - voltage telemetry system
New telemetry system for the acustic voltage control of a Lipo battery.
The transmitter including antenna is mounted on the helicopter and connected
with the flight battery either on the controller plugs or, using a minicopter-selfmade-Lipo-battery,
thru the balancing plug The power for the transmitter is also supplied
from the flight battery. 434-MHz-UHF-signal telemetry.
Four different signal rhytms for certain voltage areas:
1. short signal tone each 2,5sec above 3,40V/cell Hear
2. longer signal tone each 0,5sec between 3,40V and 3,20V/cell Hear
3. short signal tone each 0,2sec between 3,20V and 3,00V/cell Hear
4. continuous tone below 3,00V/cell Hear
Thru the exact knowledge of the voltage the battery can be discharged with much
more security and without the risk to damage the battery from undervoltage. Latest
with apperance of signal 3 the helicopter should be landed. The telemetry system
is especially interesting for pilots with a gently flight style and long flight
times or photo helicopters, because with a smooth flight style you can reach
much easier an undervoltage without recognizing it.
Adjustable loudness of the earphone with a potentiometer.
Weight of transmitter including cables and antenna: 65g (2oz)
Receiver battery included. For 10s- or 12s-Lipo-batteries, for other numbers
of cells please call.
Ord.-no. 1950 Explorer-voltage telemetry system for 10s-Lipo-batteries
Ord.-no. 1952 Explorer-voltage telemetry system for 12s-Lipo-batteries
Main rotor blades - yellow
The fully symmetrical CF-Mainrotorblades are manufactured in full carbon. The corn yellow colour gives the rotorplane an extravagant outlook with good recognization.
Ord.-no. 1012 Mainrotorblades yellow 690 mm right turn ("Joker")
